Zebra DS457 Series User Manual

9 - 2 DS457-XX20004ZZWW Fixed Mount Imager Integration Guide
Serial Parameter Defaults
Table 9-1 lists the defaults for serial host parameters. To change any option, scan the appropriate bar code(s)
provided in the Serial Host Parameters section beginning on page 9-3.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 9-1 Serial Host Default Table
Parameter Default
Page
Number
Serial Host Parameters
Serial Host Types Standard RS-232 9-5
Baud Rate 9600 9-7
Parity Type None 9-8
Data Bits 8-Bit 9-8
Check Receive Errors Enable 9-9
Hardware Handshaking None 9-10
Software Handshaking None 9-12
Host Serial Response Time-out 2 Sec 9-14
RTS Line State Low RTS 9-15
Beep on <BEL> Disable 9-15
Intercharacter Delay 0 msec 9-16
Nixdorf Beep/LED Options Normal Operation 9-17
Ignore Unknown Characters Send Bar Code 9-17

Zebra DS457 Series Specifications

General

Connectivity	USB, RS-232
Decode Capability	1D, 2D, PDF417, Postal Codes
Scan Rate	Up to 60 scans per second
Supported Barcode Types	UPC/EAN, Code 39, Code 128, QR Code, Data Matrix, PDF417, Postal Codes
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 95% (non-condensing)
Power Consumption	2.5 W (typical)