Serial Interface 9 - 5
Serial Host Types
To select a serial host interface, scan one of the following bar codes.
NOTE Scanning Standard RS-232 activates the serial driver, but does not change port settings (e.g., parity, data
bits, handshaking). Selecting another serial host type bar code changes these settings.
NOTE Selecting one of the Serial Host Types disables SSI support. To restore SSI support, scan SSI Host on
page 8-9.
NOTE The CUTE host disables all parameter scanning, including Set Defaults. If you inadvertently select CUTE,
scan *Enable Parameter Scanning (1) on page 6-6, then change the host selection.
*Standard RS-232
ICL Serial
Wincor-Nixdorf Serial Mode A
Wincor-Nixdorf Serial Mode B
To Next Page
Loading...
Need help?
General
