12 - 92 DS457-XX20004ZZWW Fixed Mount Imager Integration Guide
Data Matrix Inverse
Parameter # 588 (SSI # F1h 4Ch)
This parameter sets the Data Matrix inverse imager setting. Options are:
•
Regular Only - the imager decodes regular Data Matrix bar codes only.
•
Inverse Only - the imager decodes inverse Data Matrix bar codes only.
•
Inverse Autodetect - the imager decodes both regular and inverse Data Matrix bar codes.
NOTE When DPM Mode is set to Enable DPM Etched (1) or Enable DPM Peened (2), the decoder always
behaves as if the Data Matrix Inverse Auto detect is selected, regardless of any changes made to the
Data Matrix Inverse parameter.
*Regular
(0)
Inverse Only
(1)
Inverse Autodetect
(2)
(Default for DS457-DP Only)
To Next Page
Loading...
Need help?
General
