Zte AXON 10PRO User Manual

49
 When placing a call from the call history or the missed call
notification, you can use the card for the most recent call of
this number no matter which card is set as the default for
calling. Switch on Smart callback to enable this feature.
Control Mobile Data Use
1. Open the app list and touch Settings > Network & Internet >
Data usage.
2. Touch the Mobile data switch to enable or disable mobile
data use.
Select Network Mode
1. Open the app list and touch Settings > Network & Internet >
SIM cards > Network mode.
2. Touch the nano-SIM card name and select network mode for
the card.
Set Access Point Names
To connect to the Internet, you can use the default Access Point
Names (APN). And if you want to add a new APN, please contact
the service provider to get the necessary information.
1. Open the app list and touch Settings > Network & Internet >
SIM cards > Mobile network.
2. Touch a card tab at the top if two nano-SIM cards are
installed.
3. Touch Access point names and then touch .

Zte AXON 10PRO Specifications

General

Display Size	6.47 inches
Display Type	AMOLED
Resolution	1080 x 2340 pixels
Processor	Qualcomm Snapdragon 855
RAM	6GB / 8GB / 12GB
Storage	128GB / 256GB
Rear Camera	48 MP + 8 MP + 20 MP
Front Camera	20 MP
Battery Capacity	4000 mAh
Operating System	Android 9.0 (Pie)
Weight	175 g
Dimensions	159.2 x 73.4 x 7.9 mm
SIM	Dual SIM (Nano-SIM, dual stand-by)
Network	GSM / HSPA / LTE