23
Managing Settings
Cellular Settings
When the Smart Hub is connected to the Internet via cellular (that is the
Smart Hub is in Bridge mode or Wireless broadband mode), you can
manage options for your mobile network.
1. On the 5G CPE home page, turn off the mobile data switch and
click Yes.
2. Click Set internet.
3. Click Connection mode, Network selection, or APN settings to
configure the settings.
Connection mode: Choose to connect to the mobile network
automatically or manually every time the Smart Hub restarts. If you
are connecting to a roaming network, you need to select the check
box to connect to the Internet.
NOTE:
Data roaming may incur significant roaming charges.
Network selection: Select the preferred types of network you wish
to connect to.
APN settings: Set the Access Point Name (APN). To add a new
APN, select Manual for Mode and click Add new. Enter the
parameters and click Apply to save. To change your APN, click the
Profile box and choose a profile and click Set as default.
To Next Page
Loading...
Need help?
General
