Getting to know your Mobile Cam
15
2.5.2 T-FLASH
The T-FLASH card is used to save a recorded video file. The process of inserting and removing
the T-flash card is the same as the SIM/USIM card.
Note:
When the T-FLASH card is inserted, the metallic surface is upward, which is different from
how to insert the SIM/USIM card.
The FAT16 T-FLASH card is recommended.
2.5.3 Battery
Your Mobile Cam is equipped with a Lithium ion battery. You do not need to purchase a new
one. You should, however, charge the battery after purchase, as the stored charge may be
insufficient to power on the Mobile Cam. The battery can be recharged at any time and will not
affect operation.
The Mobile Cam will be powered off automatically when the power is low. Battery performance
will deteriorate as the battery’s lifecycle draws to an end. When this happens, you should
contact the manufacturer/repair centre to purchase a replacement.
Do not disassemble the Mobile Cam to change the battery.
2.5.4 Charging the battery
Please use only the provided charger to charge the Mobile Cam. In the charging process, the
POWER indicator is blue. When the battery is fully charged, the POWER indicator will turn
from blue to green.
To Next Page
Loading...
Need help?
General