Administrator main menu operation
29
The administrator will receive an SMS sent by Mobile Cam when the video recording is finished,
when the memory is full or when the video recording fails under the other situations.
Note: Recording is not possible if no T-flash card is inserted into the Mobile Cam.
5.2 SMS command operation
The administrator can also set Mobile Cam parameters by sending an SMS command, e.g. the
administrator can send SMS to the Mobile Cam to modify user PIN code, modify administrator
and add/delete a user.
Some functions can only be operated by SMS command – e.g. time setting and BEEP
switch setting.
Command SMS COMMAND
Adding a new user #adduser*[number]#[pin]#
Deleting a user #deluser*[number]#[pin]#
Modifying user PIN code #modpin*[newpin]#[pin]#
Modifying administrator
number
#modad*[oldnumber]*[newnumber]#[pin]#
Setting the language #setlanguage*en|ch|tw|ar#[pin]#
The default is English.
en—English
ar—Arabic
To Next Page
Loading...
Need help?
General