Zte Visible R2 User Manual

30
locked.
NOTE:
Remember the pattern, PIN, or password you set. Otherwise, you
will have to upgrade the phone software to use the phone (see
Upgrading the Phone Software).
Using Fingerprints
Register a Fingerprint
1. Swipe up on the home screen and touch Settings > Security
& location > Fingerprint.
2. Touch Fingerprint management.
3. Draw the pattern, or enter the PIN/password if you have
already set the screen lock method.
4. Touch REGISTER in the Add fingerprint message box when
it prompts.
5. Press one of your fingers on the fingerprint sensor at the back
of your phone. After feeling the slight vibration, raise your
finger and then press your finger on the sensor again.
6. Repeat step 5 until your fingerprint has been registered.
7. Touch OK.
NOTE:
You can touch Add fingerprint in the Fingerprint management
screen to add more fingerprints.

Zte Visible R2 Specifications

General

Brand	Zte
Model	Visible R2
Category	Cell Phone
Language	English