To Next Page

To Previous Page

5 Configure the Internet

Figure 5-12 Anti-DoS Attack Page

2. Set the parameters. For a description of the parameters, refer to Table 5-5.

Table 5-6 Anti-DoS Attack Parameter Descriptions

Parameter Description

Enable To enable the Anti-PortScan to be configured, select this check box.

Threshold Threshold means the maximum number of TCP or UDP connections

from one host in WAN side to CPE itself every 3 seconds.

3. Click Apply button to apply the changes.

5.4.2 Configure the Filter Criteria

The section describes how to configure filter criteria.

Steps

Filter Switch and Mode Configuration

1. On the main page of the ZXHN H3601, select Internet > Security > Filter Criteria to

the Filter Criteria page.

2. Click Filter Switch and Mode Configuration to the configuration page, see Figure

5-13.

Figure 5-13 Filter Switch and Mode Configuration Page

3. Configure filter switch and mode configuration parameters, see Table 5-7 .

SJ-20200429083356-004 | 2020-07-23(R1.0) 5-13

Questions and Answers:

Need help?

Do you have a question about the Zte ZXHN H3601 and is the answer not in the manual?

Zte ZXHN H3601 Specifications

General