ZXHN H3601 Maintenance Management Guide
1. On the main page of the ZXHN H3601, select Management&Diagnosis >
System Management > User Configuration Management to the Backup User
Configuration page, see Figure 7-7.
Figure 7-7 Backup User Configuration Page
2. Click Backup Configuration to export the user configuration file.
Restore User Configuration
1. Click Restore User Configuration to the configuration page, see Figure 7-8.
Figure 7-8 Restore Configuration Management Page
2. Click Browse to select the user configuration file, and then click Restore
Configuration to restore the device to the user configuration.
7.5 Configure the Mirror function
This procedure introduces how to perform the mirror configuration.
If the mirror configuration is performed, the packets at the WAN side will be copied to the
specified LAN interface, and it can be used for the network analysis and troubleshooting.
Steps
1. On the main page of the ZXHN H3601, select Management&Diagnosis > Mirror
Configuration to the Mirror Configuration page, see Figure 7-9.
7-6 SJ-20200429083356-004 | 2020-07-23(R1.0)
To Next Page
Loading...
Need help?
General
