5 Configure the Internet
3. Click Apply button to apply the changes.
5.4.4 Configure the ALG
The section describes how to configure ALG. ALG provides the relevant parameters of
security configuration function.
Steps
1. On the main page of the ZXHN H3601, select Internet > Security > ALG to the ALG
page, see Figure 5-19.
Figure 5-19 ALG Configuration Page
2. Select the ALG services.
3. Click Apply button to apply the changes.
Note
Click All On to select all ALG services.
Click All Off to cancel all ALG services.
5.4.5 Configure the DMZ
The section describes how to configure DMZ. DMZ provides the parameters of DMZ
configuration features.
Steps
1. On the main page of the ZXHN H3601, select Internet > Security > DMZ to the DMZ
page, see Figure 5-20.
SJ-20200429083356-004 | 2020-07-23(R1.0) 5-19