Zte ZXR10 ZSR V2 Series User Manual

ZXR10 ZSR V2 Series Router Product Description
ZTE Confidential & Proprietary 61
4 System Architecture
4.1 Product Appearance
With modular architecture, the ZXR10 ZSR V2 is designed with hot swappable modules
and components, so that it is known for amazing flexibility. The entire device is
composed by chassis, backplane, MPFU, SPIU, PIU, DPIU, power supply unit and fan
chassis.
ZXR10 2800-4&3800-8 is made of sheet metal. All the units, fan chassis, and cables
(vertical fiber egress) are installed through the front panel. ZXR10 1800-2S/2S(G)/2S(W)
is 380mm wide, belong to the desktop products, and are installed through the rear panel.
The width of the entire device complies of ZXR10
1800-2E/2E(G)/2800-3E/3E(G)/2800-4/3800-8 with the 19-inch standard in the industry.
So they can be installed in IEC297 standard rack and ETSI standard rack. The entire
device is 200mm deep, which can be put in any regular standard rack.
4.1.1 The Appearance of ZXR10 3800-8
The chassis of ZXR10 3800-8 is 3U (1U=44mm). The size of the device is 442 (W) x132
(H) x200mm (D). The front view of the ZXR10 3800-8 is as shown in the figure.
Figure 4-1 The Front View of the ZXR10 3800-8
The key components of the ZXR10 3800-8 are as shown in the figure:

Zte ZXR10 ZSR V2 Series Specifications

General

Series	ZXR10 ZSR V2 Series
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Ports	GE, 10GE
Storage Humidity	5% to 95% (non-condensing)