CI 910F CAN Bus interface Section 3 Modules
44 M&I – AC 900F Controller
Features
Protocol ABB CAN Bus protocol
CAN interfaces Acc. to ISO/DIN 11898, CAN 2.0
Channels / lines CAN 1, CAN 2 and CAN 3
Transmission rate for rack-
based I/O
100 kBit/s or 500 kBit/s
Number of CI 910F modules
per controller
Max. one module, optionally in slot
C1 or C2
Fieldbus connector D-SUB, 9-pole, female
Power supply Via coupler bus
LEDs Five LEDs for status display
Used with AC 900F
Form factor Similar to AC 900F with PM
902F/901F
Housing color Gray
Controller redundancy
support
Ye s
Hot plug Ye s
To Next Page
Loading...
Need help?
General
