02 IMPORTANT SAFETY INFORMATION
3BHS213401 E01 REV H ACS1000 AIR-COOLED USER MANUAL 22/184
2.7 Possible residual risks
Residual risks must be considered by the drive system integrator and/or plant owner when
assessing the hazards of the equipment to personnel.
The following risks can pose a hazard to drive system personnel:
Electric power equipment generates electro-magnetic fields
which can cause a hazard to people with metal implants
and / or a pacemaker.
Drive system components can move unintentionally when
being commissioned, operated, or serviced due to:
- Operation of the equipment outside the scope of the specifications
- Incorrectly assembled or installed equipment
- Wrongly connected cables
- External influence on, or damage of the equipment
- Wrong parameter settings
- Software errors
- Faulty hardware
Hazardous touch voltages can be present on drive system
components, which can be caused by:
- Operation of the equipment outside the scope of the specifications
- External influence on, or damage of the equipment
- Induced voltages by external equipment
- Condensation on equipment components, or pollution
- Faulty hardware
High temperatures, noise, particles, or gases can be emitted
from drive system components caused by:
- Operation of the equipment outside the scope of the specifications
- External influence on or damage of the equipment
- Wrong parameter settings
- Software errors
- Faulty hardware
Hazardous substances can be emitted from drive system
components caused by:
- Incorrect disposal of components
To Next Page
Loading...
General
