Related standards and directives
NameStandard
Safety of machinery – General principles for design – Risk assessment and risk reductionEN ISO 12100:2010
Safety of machinery – Safety-related parts of control systems – Part 1: General principles
for design
EN ISO 13849-
1:2015
Safety of machinery – Safety-related parts of control systems – Part 2: ValidationEN ISO 13849-
2:2012
Safety of machinery. Emergency stop. Principles for design.EN ISO 13850:2015
Safety of machinery – Electrical equipment of machines – Part 1: General requirementsEN 60204-1:2018
IEC 60204-1:2016
Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 3-1: Immunity requirements for safety-related systems and for equipment intended
to perform safety-related functions (functional safety) - General industrial applications
IEC 61326-3-1:2017
Functional safety of electrical/electronic/programmable electronic safety-related systems
- Part 1: General requirements
IEC 61508-1:2010
Functional safety of electrical/electronic/programmable electronic safety-related systems
- Part 2: Requirements for electrical/electronic/programmable electronic safety-related
systems
IEC 61508-2:2010
Functional safety – Safety instrumented systems for the process industry sector – Part
1: Framework, definitions, system, hardware and application programming requirements
IEC 61511-1:2016
Adjustable speed electrical power drive systems – Part 5-2: Safety requirements –
Functional
EN 61800-5-2:2007
IEC 61800-5-2:2016
Safety of machinery – Functional safety of safety-related electrical, electronic and pro-
grammable electronic control systems
EN 62061:2005
+ AC:2010
+ A1:2013
+ A2:2015
IEC 62061:2015 Ed.
1.2
European Machinery Directive2006/42/EC
Machine-specific C-type standardsOther
Compliance with the European Machinery Directive
The drive is an electronic product which is covered by the European Low Voltage Directive.
However, the drive internal safety function of this manual is in the scope of the Machinery
Directive as a safety component. This function complies with European harmonized standards
such as IEC/EN 61800-5-2. The declaration of conformity is delivered with the drive.
Technical data 71
To Next Page
Loading...
Need help?
General