About this manual
16
Connect the power cables.
Connect the control and the auxiliary control cables.
Electrical installation: Power cable connection:
(page 54) and Connecting the control cables:
(page 58)
For optional equipment:
Resistor braking (page 83)
Manuals for any optional equipment
Check the installation. Installation checklist (page 65)
Commission the drive. Appropriate Firmware Manual
Commission the braking chopper if required. Resistor braking (page 83)
Operating of the drive: start, stop, speed control etc. Appropriate Firmware Manual
Task See
To Next Page
Loading...
Need help?
General
