ABB FENA-01 User Manual

EtherNet/IP – Communication protocol 223
Instance attributes (Instance #1)
# Attribute
name
Services Description Data
type
3 Run 1 Get, Set 0 = Stop, 1 = Run.
See the Run/Stop event matrix
on page 162
.
BOOL
4 Run 2 Get, Set 0 = Stop, 1 = Run.
See the Run/Stop event matrix
on page 162
.
BOOL
5 Net Control Get, Set 0 = Local Control, 1 = Network
Control
BOOL
6 State Get State of Object.
See section State (Control
supervisor object) on page
167.
UINT8
7 Running 1 Get 0 = Stopped, 1 = Running BOOL
8 Running 2 Get 0 = Stopped, 1 = Running BOOL
9 Ready Get 1 = Ready, Enabled or
Stopping; 0 = Other state
BOOL
10 Faulted Get 0 = Not faulted, 1 = Fault
occurred
BOOL
11 Warning Get 0 = No Warnings present, 1 =
Warning
BOOL
12 FaultRst Get, Set 0 → 1 Fault Reset BOOL
13 Fault Code Get The fault that caused the last
transition to the Faulted state.
DRIVECOMM codes are
reported. See the drive
manual for further information
on DRIVECOMM codes.
UINT16

ABB FENA-01 Specifications

General

Brand	ABB
Model	FENA-01
Category	Adapter
Language	English