84 Modbus/TCP – Start-up
Client configuration
After the adapter module has been initialized by the drive, you
must prepare the client for communication with the module. Due to
the large number of different Modbus clients, specific instructions
cannot be provided here. Refer to the documentation of your client
for more information.
Modbus register maps
The Modbus register map which the adapter module presents to
the Modbus client is selected with parameter 02 PROTOCOL/
PROFILE (see page 51).
For Modbus register map definitions, see chapter Modbus/TCP –
Communication protocol.
For definitions of the Control word, Status word, references and
actual values for a given communication profile, see chapter
Modbus/TCP – Communication profiles.
To Next Page
Loading...
Need help?
General
