ABB REF542plus User Manual

33
10.2.4. Viewing and changing control parameters
Select the Control menu with the navigation push buttons and highlight the
desired control function. Press ENTER
to select it. Press again and
the cursor will automatically go to the first control parameter. Use the Up
or Down button to modify the parameter as wished. After the
modification, press
and use Up Down to select the next
parameter to change.
Repeat the procedure for all the parameters that need to be modified. Then
press
to go back to the list of currently installed protection functions.
Repeat the procedure for every control function that needs to have the setting
modified.
A051350
Fig. 10.2.4.-1 Control parameters page
1MRS755869
Multifunction Protection and Switchgear Control
Unit
Operator's manual
REF542plus

ABB REF542plus Specifications

General

Brand	ABB
Model	REF542plus
Category	Control Unit
Language	English