Reset max. values: this sub menu resets the maximum and mean current
values in the observation period. Also the sum of switched off current is reset
from here.
Reset energy values: all the energy values (active, reactive, apparent) are reset
from here.
Reset CB cycles: a circuit breaker cycle is a close operation and the
subsequent open operation. The unit sums the cycles. This cycle number is
reset from here.
Reset fault recorder: the fault recorder data is cleared from here.
Reset Start/Trip: the start and trip protection events are cleared from here.
Reset counters: the unit working hours are reset from here.
19.2. Service page
The service page menu is composed of several submenus. Browse through
the submenus with UP
and DOWN buttons. Press ENTER to
enter the selected submenu.
A051463
Fig. 19.2.-1 Service page menu
The service page contains the following submenus.
Statistics
This submenu shows the FUPLA cycle time and other information related to
the current configuration in the unit.
82
REF542plus
Multifunction Protection and Switchgear Control
Unit
Operator's manual
1MRS755869
To Next Page
Loading...
Need help?
General
