WaterMaster
Electromagnetic flowmeter 5 Start-up and Operation
34 IM/WM–EN Rev. M
5.3.1 Default Passwords
The WaterMaster transmitter is supplied with default passwords for access to 'Standard' and 'Advanced'
level menus.
The two passwords are:
'Standard' access password: 2 or blank
'Advanced' access password: 3 or blank
Passwords can contain up to 5 characters and are not case sensitive.
To prevent unauthorized access ABB recommend the default passwords are changed on commissioning.
5.3.2 Entering Passwords
To select password characters and enter passwords:
1. Scroll to the 'Access Level' screen and select the required access level. Press the key to display
the 'Enter Password' screen.
2. Use the and keys to scroll to and highlight the first password character to be selected.
3. Press the key to select the highlighted character (add it to the password set).
4. Use the and keys to highlight the next password character to be selected.
5. Repeat steps 2 to 4 until all characters have been added to the password.
6. Press the key to accept the password and display menus available at the requested access level.
Note. When allocating passwords, record a copy of each password and store in a safe location. It is not
possible to interrogate the transmitter to 'recover' passwords once they have been set.
To Next Page
Loading...
Need help?
General
