Your Accu-Chek Spirit Combo insulin pump
41
3.9 Returning the piston rod
Make sure that your Pump is in STOP mode and the infusion set is not
connected to your body.
If there is a cartridge already in the P
ump,
remove it: unscrew carefully, and do not pull the
cartridge out until it is completely unscrewed.
When the piston rod has returned completely,
the CARTRIDGE VOLUME screen displays the
maximum volume, 315 U.
5.
The piston rod begins to return.
Do not touch or otherwise disturb the piston rod
while it is rewinding as this could result in
damage to your Pump.
4.
Make sure your infusion set is disconnected and
the cartridge has been removed.
Press and hold f for three seconds, until you
hear a melody.
3.
Press d to move to the CARTRIDGE CHANGE
screen.
Press f to select.
2.
1.
To Next Page
Loading...
Need help?
General
