Machine Maintenance 3-61
Replacing the LCD Bezel 0
1. Place and align the bezel on top the LCD panel. Press the bezel on all sides until it snaps
into place.
Figure 3-88. LCD Bezel
Make sure that the LCD, webcam, microphone, and antenna cables are properly routed
on the hinge sides and there is no gap between the bezel and the LCD cover.
2. Secure the bezel with the two screws.
Figure 3-89. LCD Bezel Screws
Table 3-24. Screws
Step Screw Quantity Screw Type
LCD Bezel Assembly M2.5 × L5 2
To Next Page
Loading...
Need help?
General