Chapter 4 69
Use the following procedure as a guide for computer problems.
NOTE: The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype cards, or
modified options can give false errors and invalid system responses.
1. Obtain the failing symptoms in as much detail as possible.
2. Verify the symptoms by attempting to re-create the failure by running the diagnostic test or by repeating
the same operation.
3. Use the following table with the verified symptom to determine which page to go to.
Symptoms (Verified) Go To
Power failure. (The power indicator does not
go on or stay on.)
“Power System Check” on page 71.
POST does not complete. No beep or error
codes are indicated.
“Power-On Self-Test (POST) Error Message”
on page 73
“Undetermined Problems” on page 88
POST detects an error and displayed
messages on screen.
“Error Message List” on page 74
Other symptoms (i.e. LCD display problems or
others).
“Power-On Self-Test (POST) Error Message”
on page 73
Symptoms cannot be re-created (intermittent
problems).
Use the customer-reported symptoms and go
to “Power-On Self-Test (POST) Error
Message” on page 73
“Intermittent Problems” on page 87
“Undetermined Problems” on page 88
Troubleshooting
Chapter 4
To Next Page
Loading...
Need help?
General