User's Manual | ACOM 1200S | 1.8-54 MHz Linear Power Amplifier
S e c t i o n MENUS - SETTINGS AND OPTIONS | Page
41
of
60
5.4. Menu USER PREFERENCES
Figure 5-5 Menu USER PREFERENCES
Figure 5-5 Menu USER PREFERENCES
a) ANTENNA TUNER/SWITCH INSTALLED
If ACOM 04AT remote automatic antenna tuner is installed, select YES. Refer to ACOM 04AT User's Manual
(available for download at www.acom-bg.com).
b) AUTOMATIC MENU EXIT
When AUTOMATIC MENU EXIT is turned ON, the amplifier exits the currently selected menu if no button
has been pressed for more than 5 minutes.
If AUTOMATIC MENU EXIT is turned OFF, the amplifier remains in the currently selected menu until the
EXIT button is pushed.
c) AUTO OPERATE
The AUTO OPERATE user setting is described in Sections 3.3 Initial Turning On and 4.1.c) AUTO OPERATE user
settings.
d) CALL SIGN
If entered here, a call sign (or another text) will be included in the Fault Log file generated by the amplifier
(see Section 5.5 Menu FAULTS LOG). The call sign (or another text) will not replace ACOM 1200S logo on the
startup screen.
Use the SELECT and SELECT buttons (left or right arrows) to select the character position. The ITEM
and ITEM buttons (up and down arrows) change the characters.
To Next Page
Loading...
Need help?
General
