Advent Communications
209298 - DVE5000 Technical Operation Handbook - CL140042 Page 89 of 110
Response ROANTx
Parameters x – polarisation (0 = linear horizontal, 1 = linear vertical, 2
= circular left, 3 = circular right)
Command WPPTSx
Response RPPTSx
Query RPPTS
Response RPPTSx
PTS per Picture
Parameters x – enable (0 = Off, 1 = On)
Command WVBIPx
Response RVBIPx
Query RVBIP
Response RVBIPx
VBI in Picture
Parameters x – enable (0 = Off, 1 = On)
Command WDPPE
Response RDPPEx
Query RDPPE
Response RDPPEx
Dual Prime predictions
in encoder
Parameters x – enable (0 = Enable, 1 = Disable)
Command WQVBIxxx
Response RQVBIxxx
Query RQVBI
Response RQVBIxxx
Quant VBI – Qp in VBI
stripe
Parameters xxx - VBI Qp (in range 0-255)
Command WVHDBx
Response RVHDBx
Query RVHDB
Response RVHDBx
HD Percentage Bars
display
Parameters x – percentage (0 – 75%, 1 – 100%)
Command WVHDSx
Response RVHDSx
Query RVHDS
Response RVHDSx
HD Bars Service Name
Display enable
Parameters x – enable (0 = Off, 1 = On)
8.6.1 Remote Modulation settings
Command WOSYMxx.xxxx
Response ROSYMxx.xxxx
Query ROSYM
QPSK symbol rate
Response ROSYMxx.xxxx