Agilent Technologies 8647A User Manual

1a-16
Operation Examples
Offsetting the RF Output from a Reference
Offsetting the RF Output from a Reference
In this example, you will enter an RF output frequency, set it as the reference value, and
then offset the RF output frequency 10 MHz below the reference value.
Setting the Reference Value
1. Set the frequency to 500 MHz.
2. Set 500 MHz as the reference frequency.
The ∆ symbol appears in the display to indicate that the reference mode is selected. The
output frequency is still 500 MHz.

Agilent Technologies 8647A Specifications

General

Brand	Agilent Technologies
Model	8647A
Category	Test Equipment
Language	English