230 Agilent N518xA, E8663B, E44x8C, and E82x7D Signal Generators Programming Guide
Creating and Downloading Waveform Files
Downloading E443xB Signal Generator Files
• Creates a marker file and places the marker information, bits 14 and 15 of the E443xB I data,
into the marker file for markers one and two. Markers three and four, within the new marker file,
are set to zero (off).
• Interleaves the 16- bit I and Q data creating one I/Q file.
• Creates a file header with all parameters set to unspecified (factory default file header setting).
1100110110111001 0000100111011001
1001011011100100
E443xB 14-Bit Data
I data Q data
Subtracts 8192, Left Shifts, and Adds Zeros—Removes Marker and Reserved Bits
16-bit I data 16-bit Q data
Marker bits
Reserved bits
(16-Bit Data Format)
Bits added
Bits added
11
Marker bits removed
1000011101100100
00
Reserved bits removed
14 data bits
14 data bits
0011
Places the I Marker Bits into the Signal Generator Marker File
Marker 3 and 4 bits
Marker 1 and 2 bits from the E443xB I data
To Next Page
Loading...
Need help?
General
