Agilent N518xA, E8663B, E44x8C, and E82x7D Signal Generators Programming Guide 15
Getting Started with Remote Operation
Using the Web Browser
Displaying the LAN Configuration Summary (Agilent MXG)
TCP Keep Alive: On
Domain Name:
a
<empty>
TCP Keep Alive Timeout: 1800.0 sec
Signal Generator Web Server Interface
Description: Agilent <model_number>(<serial_number>)
SICL Interface Name
b
:
gpib0
Web Password: agilent
a.The Domain Name defaults to a null field.
b.This information is part of the “Advanced Information about this Web-Enabled <signal generator model number>”
Table 1-1 LAN Configuration Summary Values
Parameter Default
For details on each key, use the key help (described in the User’s Guide).
Confirm Restore Settings to Factory Defaults: Confirming this action configures the
signal generator to its original factory default settings. For information regarding
those default settings, refer to Table 1-1 on page 14.
Utility > IO Config
SCPI command:
Not applicable
To Next Page
Loading...
Need help?
General
