Agilent InfinityLab LC Series Multicolumn Thermostats User Manual 116
7 Error Information
MCT Error Messages
WAIT TIMEOUT
Error ID: 32044 (left), 32045 (right)
Wait operation for temperature timed out.
HEATEX OVERTEMP
Error ID: 32080 (left), 32081 (right)
The temperature of the Peltier heat sink has exceeded the maximum limit.
UHX SENSOR ERROR
Error ID: 32090 (left), 32091 (right)
Upper heat exchanger sensor has an error.
Probable cause Suggested actions
1 Defective heater
Contact your Agilent service representative.
2 Defective mainboard
Please contact your Agilent service representa-
tive.
Probable cause Suggested actions
1 Defective heater assembly
Please contact your Agilent service representa-
tive.
2 Defective mainboard
Please contact your Agilent service representa-
tive.
Probable cause Suggested actions
1 Defective sensor
Please contact your Agilent service representa-
tive.
2 Defective cable
Please contact your Agilent service representa-
tive.
3 Defective mainboard
Please contact your Agilent service representa-
tive.
To Next Page
Loading...
Need help?
General
