Agilent InfinityLab LC Series Multicolumn Thermostats User Manual 92
4 Preparing the Module
Capillary Coding Guide
Capillary Coding Guide
Syntax for Capillary Description
The tables below are your guide to identifying the proper specifications for your
capillary. On all capillaries, dimensions are noted in id (mm), length (mm) and,
where applicable, volume (µL). When you receive your capillary, these
abbreviations are printed on the packaging.
Using the guide: This fitting is coded as SPF, for Swagelok, PEEK, Fingertight.
Table 13 Capillary coding guide
Type
The type gives some
indication on the pri-
mary function, like a
loop or a connection
capillary.
Material
The material indicates
which raw material is
used.
Fitting left/fitting right
The fitting left/right
indicate which fitting
is used on both ends
of the capillary.
Key Descrip-
tion
Key Descrip-
tion
Key Descrip-
tion
Capillary Connec-
tion capil-
laries
SS Stainless
steel
W Swagelok
+ 0.8 mm
Port id
Loop Loop cap-
illaries
Ti Titanium S Swagelok
+ 1.6 mm
Port id
Seat Autosam-
pler needle
seats
PK PEEK M Metric M4
+ 0.8 mm
Port id
Tube Tubing FS/PK PEEK-coat
ed fused
silica
1
E Metric M3
+ 1.6 mm
Port id
Heat
exchanger
Heat
exchanger
PK/SS Stainless
steel-coat
ed PEEK
2
U Swagelok
union
To Next Page
Loading...
Need help?
General
