224cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL No.: SLM531 • 10/2020 • 10093
(toll free)
28
Adjusting the Cutting Height
The mower has a cutting height adjustment lever (9) to easily adjust the
cutting height. There are 7 height settings.
NOTE: Always try to adjust the cutting height of the lawn mower while
positioned on the area of grass you plan to mow.
It is recommended to start on a higher setting and mow a trial area of
lawn before deciding on the nal cutting height position. Then re-adjust if
necessary.
1. To increase the cutting height, rst pull the cutting height adjustment
lever (9) outward a little towards the wheel, and move it up a notch,
towards the rear of the lawn mower. (Fig. J1 & Fig. J2)
2. To decrease the cutting height, pull the cutting height adjustment lever
(9) outward a little towards the wheel (20), and move it down a notch,
towards the engine (11). (Fig. J1 & Fig. J3)
3. After adjustment, ensure the lever (9) is fully located in the selected
notch.
Preparing for Operation
J1
J2
INCREASE
J3
DECREASE
To Next Page
Loading...
Need help?
General
