"
If you get into difficulty with any of the functions
simply escape and start again:
•
If you are not sure which screen you have
selected, check the right hand screen title bar.
This displays the same function name as is printed
on the related select key.
•
If the
and
key are flashing and you
are not sure of the correct action, press
.
•
If you are in any screen menu and not sure what to
do, press the
key to abort.
•
If you have made changes you are not happy with,
press
to restore the settings when the screen
was selected or previously saved by pressing
.
•
To return the settings to the default starting
condition, press
.
•
To clear a memory use the
function with
each screen and store to the memory. We
recommend you store and lock your preferred
default settings to a user memory named
.
•
If you suspect a problem then turn the console off,
wait a few seconds and turn back on again.
•
If all else fails or you wish to start again use the
hard reset facility to clear the memories.
For further assistance and the latest icon news please
refer to your dealer or the Allen & Heath Internet web
site. The most recent version of software is available
to be loaded into your console using the RS232 port.
Instructions are provided at the Allen & Heath web
site.
http://www.allen-heath.com
Perform a
only if you wish to clear
the memories and start again. Be careful that you do
not overwrite any other users settings if these have
not been archived first.
Performing a hard reset clears the
memories and overwrites any settings previously
stored. Check that you really want to do this and
are authorised to do so. If the console is used by
more than one operator ensure that a memory
archiving procedure is in place.
Turn down all amplifier and fader levels
before performing a hard reset.
= To reset the RAM memory. This does
not affect the stored user memories:
•
Hold down the
key while powering up the
console.
•
Press the flashing
key to accept the reset,
to abort.
= To reset all the memories including the
stored user memories. This restores the console
settings and memories to their default starting values:
•
Hold down the
and
keys while
powering up the console.
•
Press the flashing
key to accept the reset,
to abort.
To Next Page
Loading...
Need help?
General
