ALLEN & HEATH Xone 4D User Manual

Allen & Heath 46 XONE:4D User Guide
USER OPTIONS
Internal Link Options
The Xone:4D offers several internal option settings:
 FX1 and FX2 Return Routing— The FX1 and FX2 Returns are set, by
default, to route to the main LR Mix. Link options allow the return to be
routed through either Filter 1 or Filter 2.
 Disabling / Enabling RIAA Preamps—All channels are fitted with RI-
AA preamplifiers. Link options allow the RIAA preamplifier stage to be
enabled or disabled. When disabled, the Phono input becomes a Line in-
put.
 FX2 Pre / Post Fade Assignment—The FX2 channel send is set, by
default, to pre-fader. Link options allow the channel FX2 send to become
post-fader.
CAUTION : Refer the above link options to an Allen and Heath approved
service centre only. To reduce the risk of electric shock do not perform any
servicing other than that described in the operating instructions unless you are
qualified to do so.
Replacing the Crossfader
Replacement crossfader Assembly: Allen & Heath Part No. 003-579. Please
contact your Allen and Heath approved service centre to undertake crossfader
replacement.

ALLEN & HEATH Xone 4D Specifications

General

Sample rate	96 kHz
Frequency range	22 - 22000 Hz
Channels quantity	20 channels
Digital sound processing	24 bit
Microphone in	Yes
Product color	Black
Video capability	No
Equalizer bands quantity	3

Weight and Dimensions

Depth	358 mm
Width	432 mm
Height	88 mm
Weight	5000 g
Package depth	490 mm
Package width	575 mm
Package height	195 mm
Package weight	6000 g