Quick Start
PowerFlex 70 Adjustable
Frequency AC Drive
When reading this document, look for this symbol “ ” to guide
you through the 5 BASIC STEPS needed to install, start-up and
program the PowerFlex 70. The information provided Does Not
replace the User Manual and is intended for qualified drive service
personnel only. For detailed PowerFlex 70 information including
application considerations and related precautions refer to the following:
For Allen-Bradley Drives Technical Support:
Title Publication Available…
PowerFlex 70 User Manual 20A-UM001… on the CD supplied with the drive or
at www.ab.com/manuals/dr
PowerFlex Reference Manual PFLEX-RM001…
Title Online at…
Allen-Bradley Drives Technical Support www.ab.com/support/abdrives
Step x
Step 1 Read the General Precautions
!
ATTENTION: This drive contains ESD (Electrostatic Discharge)
sensitive parts and assemblies. Static control precautions are required
when installing, testing, servicing or repairing this assembly.
Component damage may result if ESD control procedures are not
followed. If you are not familiar with static control procedures,
reference A-B publication 8000-4.5.2, “Guarding Against Electrostatic
Damage” or any other applicable ESD protection handbook.
!
ATTENTION: An incorrectly applied or installed drive can result in
component damage or a reduction in product life. Wiring or application
errors, such as, undersizing the motor, incorrect or inadequate AC
supply, or excessive ambient temperatures may result in malfunction of
the system.
!
ATTENTION: Only qualified personnel familiar with adjustable
frequency AC drives and associated machinery should plan or
implement the installation, start-up and subsequent maintenance of the
system. Failure to comply may result in personal injury and/or
equipment damage.
To Next Page
Need help?
General
