Installation Instructions
PowerFlex
®
70 Adjustable Frequency
AC Drive
When reading this document, look for this symbol “ ” to guide
you through the 5 BASIC STEPS needed to install and perform a Basic
Start-Up of the PowerFlex 70. A Human Interface Module (HIM) is
required to perform the Basic Start-Up routine covered in this manual.
The information provided Does Not
replace the User Manual and is
intended for qualified drive service personnel only.
For detailed PowerFlex 70 information including advanced start-up
routines, programming, application considerations and related
precautions refer to the following publications online at
www.rockwellautomation.com/literature:
To order paper copies of technical documentation, contact your local
Rockwell Automation distributor or sales representative.
To find your local Rockwell Automation distributor, visit
www.rockwellautomation.com/locations
Allen-Bradley Drives Technical Support
Title Publication
PowerFlex 70 User Manual 20A-UM001
DriveGuard Safe-Off Option (Series B) for PowerFlex 40P and
PowerFlex 70 AC Drives
20A-UM003
PowerFlex Comm Adapter Manuals 20COMM-UM
Dynamic Braking Resistor Calculator PFLEX-AT001
PowerFlex 70 and 700 Reference Manual - Volume 1 PFLEX-RM001
PowerFlex Reference Manual PFLEX-RM004
Wiring and Grounding Guidelines for Pulse Width Modulated (PWM)
AC Drives
DRIVES-IN001
Online at… By Email at… By Telephone at…
www.ab.com/support/abdrives support@drives.ra.rockwell.com 262-512-8176
Step x
To Next Page
Need help?
General
