Installation Instructions
PowerFlex 70 Adjustable Frequency AC Drive
This document explains the 5 BASIC STEPS needed to install and perform a
Basic Start-up of the PowerFlex® 70 AC drive. A Human Interface Module
(HIM) is required to perform the Basic Start-up routine that is covered in this
manual.
The information provided in this manual is intended for qualified installers
only.
Additional Resources
These documents contain more information for related products from Rockwell
Automation.
Resource Description
PowerFlex 70 AC Drives Technical Data, publication
20A-TD001
This publication provides detailed drive specifications, option
specifications, and input protection device ratings.
PowerFlex 70 Adjustable Frequency AC Drive User
Manual, publication 20A-UM001
Provides the basic information that is needed to start up and
troubleshoot the PowerFlex 70 Adjustable Frequency AC Drive.
DriveGuard® Safe Torque Off Option (Series B) for
PowerFlex 40P and PowerFlex 70 AC Drives,
publication PFLEX-UM003
Provides information for the installation and operation of the
DriveGuard Safe Torque Off option.
PowerFlex Communication Adapter User Manuals,
publication 20COMM-UMxxx (Adapter-specific user
manual)
Provides information for the installation and operation of the
various communication protocol adapters available for the
drive.
Dynamic Braking Resistor Calculator,
publication PFLEX-AT001
Provided information for determining dynamic braking
requirements and evaluating resistors for dynamic braking.
PowerFlex 70 and 700 Reference Manual - Volume 1,
publication PFLEX-RM001
Provides detailed information for specifications and
dimensions, operation, and dynamic brake selection for the
drive.
PowerFlex 70 EC and 70 VC Reference Manual,
publication PFLEX-RM004
Provides detailed drive information including operation,
parameter descriptions, and programming.
Wiring and Grounding Guidelines for Pulse Width
Modulated (PWM) AC Drives,
publication DRIVES-IN001
Provides the basic information that is needed to properly wire
and ground Pulse Width Modulated (PWM) AC drives.
Industry Installation Guidelines for Pulse Width
Modulated (PWM) AC Drives,
publication DRIVES-AT003
Provides basic information for enclosure systems and
environmental/location considerations (to help protect
against environmental contaminants), and power and
grounding considerations that are needed to properly install
AC drives.
Product Certifications website, http://www.ab.com
Provides declarations of conformity, certificates, and other
certification details.
To Next Page
Need help?
General
