Allen-Bradley PowerFlex 700H User Manual

Access Procedures 3-15
Removing the Covers from
the Power Structures
Moving the Control Frame
Removal
1. Remove power from the drive (Removing Power from the Drive on
page 3-3).
2. Loosen the T8 Torx-head screws, which secure the Control Frame to the
drive enclosure.
3. Swing the Control Frame out and away from the power structure.
Installation
Install the Control Frame in reverse order of removal, while referring to
Torque Specifications on page 3-1
.
Screws

Allen-Bradley PowerFlex 700H Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 700H
Category	Controller
Language	English