Alpine CDE-W235EBT User Manual

2
5
3
1
2
4
Turn the Rotary encoder to select “BLUETOOTH", and then
press
s
/ENTER.
The BLUETOOTH setup mode is activated.
Press and hold AUDIO/SETUP for at least 2 seconds.
The SETUP mode is cancelled.
Turn the Rotary encoder to select the desired items, and
then press
s
/ENTER.
BLUETOOTH:
BT IN
*1
s
PAIRED DEV
s
VISIBLE M
*1
s
SEARCH DEV
*1
s
CALL SOUND
*2
s
SENDER ID
*2
s
PB UPDATE
*2
s
PB ORDER
s
AUTO ANS
*2
s
SEV NAME
*2
s
SPEAKER SL
*2
s
FW VERSION
s
FW UPDATE
*1
Turn the Rotary encoder to select a BLUETOOTH compatible
device you want to use (you want to change connection)
and then press
s
/ENTER.
Turn the Rotary encoder to select “CONNECT” to connect
the selected device.
The connected device is marked with “ ”. Select “DISCONNECT” to
disconnect this device. Select “CLEAR” when you want to clear the
device from the device list.
Turn the Rotary encoder to change the settings.
Note
•
e BLUETOOTH setup mode can also be activated by pressing and
holding for at least 2 seconds.
*1
*2
e items are not displayed during a phone call.
e items are not displayed when "HFP" is set to OFF. Refer to
"Setting the BLUETOOTH Connection (BT IN)" on page 19.
Note
Note
•
•
•
•
•
•
•
•
Press
c
to return to the previous mode.
If the connection is successfully changed, “CONNECTED” is displayed for
2 seconds and the
z
indicator lights up, then the display returns to the
SETUP screen.
Pressing and holding
c
for at least 2 seconds will return to normal
mode.
If a mobile phone is connected to this unit successfully, the indicator
lights up to show the battery quantity of the connected mobile phone.
e indicator lights up when the battery quantity is in middle level,
and it blinks in low level.
If no operation is performed for 60 seconds, the unit will return to normal
mode automatically.
Indicator (Signal Strength):
e indicator will display the current signal strength of mobile phone.
e indicator blinks when the signal of the connected mobile phone is
weak.
Depending on the connected mobile phone, the (battery quantity),
(signal strength) and (message) indicators may not be displayed.
If all the 3 positions have been registered, you cannot register the 4th
device. To register another device, you need to delete one of the devices
from position 1 to 3 rst.
With BLUETOOTH technology, you can place a hands-free call by
a BLUETOOTH-equipped mobile phone. Audio information of a
BLUETOOTH compatible mobile phone, a portable audio player, etc., is
controllable/playable wirelessly from this unit.
You can set whether this unit can be recognised or not from a
BLUETOOTH compatible device. Normally set this to VISI M ON.
e BLUETOOTH device is used when a connectable BLUETOOTH
compatible device is searched and connected to this unit, or when a new
BLUETOOTH compatible device is registered.
Select one of 3 connected BLUETOOTH compatible devices that you
previously registered.
Setting the BLUETOOTH Connection (BT IN)
Setting the Visible Mode
Pairing a BLUETOOTH Device from the unit
Setting the BLUETOOTH Device
Setting item: BT IN
Setting item: PAIRED DEV
e
e
e
Further setting items: HFP / AUDIO
Setting contents:
OFF / ON (Initial setting)
ON:
Select when you want to pair your BLUETOOTH compatible phone
with this unit.
OFF:
Hands-Free Phone function is not used.
ON:
Select when you want to use BLUETOOTH Audio function.
OFF:
BLUETOOTH Audio function is not used.
Note
•
When HFP is set to OFF, the indicators related to Hands-free phone
( battery quantity, signal strength and message) will not be
displayed.
Hands-Free Phone setting (HFP)
BLUETOOTH Audio setting (AUDIO)
Setting item: VISIBLE M
Setting item: SEARCH DEV
e
e
Setting contents:
VISI M OFF / VISI M ON (Initial setting)
VISI M OFF:
Disable recognition of this unit from the BLUETOOTH compatible
device.
VISI M ON:
Enable recognition of this unit from the BLUETOOTH compatible
device.
1
2
When SEARCH DEV is selected, and “SEARCHING” is
displayed, the search gets started.
Turn the Rotary encoder to select the name of the device
to be connected from the Device Search list and then press
s
/ENTER.
Note
•
e “SEARCHING” operation can be stopped by pressing
c
.
19
-EN

Alpine CDE-W235EBT Specifications

General

Brand	Alpine
Model	CDE-W235EBT
Category	Car Receiver
Language	English