Alpine CDE-W235EBT User Manual

Getting Started
SOURCE/
/ENTER

Rotary encoder
AUDIO/SETUP
SOURCE/
/ENTER

Rotary encoder
SETUP
Accessory List
Turning Power On and O
Source Selection
Initial System Start-Up
Adjusting Volume
.
Head Unit .........................................................................................1
.
Power Cable .....................................................................................1
.
Microphone (CDE-W235EBT only)..................................................1
.
Screw (M5 × 8) .................................................................................4
.
Owner’s Manual.........................................................................1 set
Press SOURCE/
C
to turn on the unit.
Note
Press and hold SOURCE/
C
for at least 2 seconds to turn o
the unit.
Note
Press SOURCE/
C
to change the source.
TUNER
d
DISC
d
USB AUDIO/IPOD
*1
d
BT AUDIO
*2
d
AUXILIARY
*3
d
TUNER
Be sure to press the
RESET
button when using the unit for the rst time,
aer changing the car battery, etc.
Turn the Rotary encoder until the desired sound is obtained.
RESET button
*1
•
•
*2
*3
Only when the iPod/iPhone is connected.
e unit can be turned on by pressing any other button except
v
.
e rst time power is turned on, the volume will start from level 12.
Only for CDE-W235EBT.
Only when BT AUDIO is set to ON. Refer to “Setting the
BLUETOOTH Connection (BT IN)” on page 19.
Only when AUX SETUP is set to ON. For details, refer to “Setting
the AUX SETUP Mode” on page 17 .
1
2
Turn o the unit power.
Press RESET with a ballpoint pen or similar pointed object.
Setting Time
1
2
3
Press and hold AUDIO/SETUP (CDE-W235EBT only) for at
least 2 seconds or press SETUP (CDE-W233E only) to activate
the SETUP selection mode.
Turn the Rotary encoder to select GENERAL, and then press
s
/ENTER.
AUDIO
s
GENERAL
s
DISPLAY
s
IPOD
s
BLUETOOTH
*
Turn the Rotary encoder to select CLOCK ADJ, and then
press
s
/ENTER.
The time indication will blink.
*
*
*
CDE-W235EBT only.
e illustration is for CDE-W233E.
e illustration is for CDE-W235EBT.
4
5
Turn the Rotary encoder to adjust the hours while the time
indication is blinking.
When the hour has been adjusted, press
s
/ENTER.
6
Turn the Rotary encoder to adjust the minutes while the
time indication is blinking.
6
-EN

Alpine CDE-W235EBT Specifications

General

Brand	Alpine
Model	CDE-W235EBT
Category	Car Receiver
Language	English