Alto-Shaam COMBITHERM CTP6-10G User Manual

CTP Combitherm
64
•
MN-35948
•
Rev 16
•
10/18
•
Combitherm® CT PROformance™ Series Operator’s Manual
Weekly Maintenance
On a weekly basis, the heat exchanger on gas
models and convection elements on electric models
must be inspected.
•
Remove all wire shelves from inside the
appliance.
•
Remove le side rack from the oven cavity.
•
Flip the tabs or loosen the thumb screws on the
fan panel to the open position and swing the fan
guard cover plate toward the back of the oven.
•
Inspect the heat exchanger on gas models for
signs of grease and/or carbon buildup, scale
buildup, and any signs of major deformation.
Refer to images A and B.
•
Inspect that the  ue pipe seal is tight and intact.
Refer to image C.
•
Inspect the convection elements for signs of
cracking, grease and/or carbon buildup, scale
buildup, and any signs of major deformation.
Refer to image D.
A
B
D
C
Weekly Maintenance

Alto-Shaam COMBITHERM CTP6-10G Specifications

General

Brand	Alto-Shaam
Model	COMBITHERM CTP6-10G
Category	Convection Oven
Language	English