Alto-Shaam COMBITHERM CTP6-10G User Manual

CTP Combitherm
66
•
MN-35948
•
Rev 16
•
10/18
•
Combitherm® CT PROformance™ Series Operator’s Manual
Unit Information
Business Name: ________________________________________
Model Number: ________________________________________
Serial Number: _________________________________
Weekly Inspection Start Date: _________________________________
Weekly Inspection Checklist
Inspect - Oven cavity lamp
Inspect - Oven cavity for signs of grease/carbon buildup
Inspect - Loosen thumb screws to inspect behind the fan panel inside the oven cavity for signs of grease/carbon buildup
Inspect - Loosen thumb screws to inspect behind the fan panel inside the oven cavity for signs of scale buildup
Inspect - The heat exchanger for any signs of major deformation. If yes, immediately remove from service and take corrective
action steps.
Inspect - The heat exchanger for any loose/disconnected pipes or flanges. If yes, immediately remove from service and take
corrective action steps.
Inspect - Convection elements for signs of cracking, deformation, or damage
Clean ventless hood grease filters
Employee initials
Component Malfunction and Replacement
List details of the failure(s) next to the day they occurred. Leave blank if components are working properly.
Week 1
Week 2
Week 3
Week 4
G
G
E
EG Gas units only Electric units only
Weekly Inspection

Alto-Shaam COMBITHERM CTP6-10G Specifications

General

Brand	Alto-Shaam
Model	COMBITHERM CTP6-10G
Category	Convection Oven
Language	English