Version 1.6 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 22
Figure 22
5 Other Features
5.1 Radio Controlled Clock (RCC)
After the remote sensor is powered up, the sensor will transmit weather data for 30 seconds, and then
the sensor will begin radio controlled clock (RCC) reception. During the RCC time reception period
(maximum 5 minutes), no weather data will be transmitted to avoid interference.
If the signal reception is not successful within 3 minute, the signal search will be cancelled and will
automatically resume every two hours until the signal is successfully captured. The regular RF link
will resume once RCC reception routine is finished. In some locations, RCC reception may take a
couple of days to receive the signal.
Once the radio controlled time is received, the RCC reception icon will turn on next to the date
and time field.
5.2 SD Card Export and Firmware Updates
With the use of an optional Micro SD Card (available from Ambient Weather), you can export data to
a computer, save historical graphs (in the event of a power failure) and update firmware when new
versions are released.
To Next Page
Loading...
Need help?
General
