Setup Pages
51
MVP Modero ViewPoint Touch Panels
Setup Pages
AMX Modero panels feature on-board Setup pages. Use the options in the Setup pages to access panel
information and make various configuration changes.
To access the Setup pages, press the two lower external pushbuttons on either side of the panel
simultaneously and hold for 3 seconds (FIG. 42).
Setup Pages
The Setup page (FIG. 43) allows quick access to several basic panel properties:
Features on this page include:
FIG. 42 Setup Page Access buttons
FIG. 43 MVP-7500 and MVP-8400 Setup pages
Setup Page
Navigation Buttons: The buttons along on the left side of the page provide access to secondary Setup
pages (see following sections).
Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual
indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Setup Page Access buttons:
Press and hold simultaneously for
3 seconds to access the Setup pages
Press and hold for 6 seconds
to access the Calibration page.
MVP-7500
MVP-8400
To Next Page
Loading...
Need help?
General
