72
use and maintenance Leonardo 125 - Leonardo 150 - Leonardo 250
,5"2)#!.4#(!24
Engine oil (recommended):
0
SUPERBIKE 4, SAE 5W - 40 or 4T FORMULA RACING, SAE 5W - 40.
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance with or superior to the
CCMC G-4, A.P.I. SG. specifications.
Transmission oil (recommended):
0
F.C., SAE 75W - 90 or GEAR SYNTH, SAE 75W - 90.
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance with or superior to the
A.P.I. GL4 specifications.
Fork oil (recommended):
0
F.A. 5W or
0
F.A. 20W fork oil;
as an alternative FORK 5W or FORK 20W.
If you need an oil with intermediate characteristics in comparison with the
0
F.A. 5W and
0
F.A. 20W or FORK 5W and
FORK 20W, these can be mixed as indicated below:
SAE 10W =
0
F.A. 5W 67% of the volume, +
0
F.A. 20W 33% of the volume or
FORK 5W 67% of the volume + FORK 20W 33% of the volume.
SAE 15W =
0
F.A. 5W 33% of the volume, +
0
F.A. 20W 67% of the volume or
FORK 5W 33% of the volume + FORK 20W 67% of the volume.
Bearings and other lubrication points (recommended):
+
0
BIMOL GREASE 481 or GREASE SM 2;
Ì
0
AUTOGREASE MP or GREASE 30.
As an alternative to the recommended product, use high-quality grease for rolling bearings, working temperature range -30°C.... +140°C,
dripping point 150°C... 230°C, high protection against corrosion, good resistance to water and oxidation.
Protection of the battery poles: neutral grease or vaseline.
@
a
WARNING
Use new brake fluid only.
Brake fluid (recommended):
0
F.F., DOT 5 (DOT 4 compatible) or BRAKE 5.1, DOT 5 (compatible DOT 4).
a
WARNING
Use only antifreeze and anticorrosive without nitrite, ensuring protection at -35°C at least.
Engine coolant (recommended):
0
ECOBLU –40°C or COOL.
To Next Page
Loading...
Need help?
General