102
use and maintenance RSV mille ! - RSV mille R !
BULBS
Carefully read p. 59 (MAINTENANCE).
Risk of fire.
Keep fuel and other flammable substan-
ces away from the electrical componen-
ts.
Before changing a bulb, move the igni-
tion switch to position “C” and wait a
few minutes, so that the bulb cools
down.
Change the bulb wearing clean gloves
or using a clean and dry cloth.
Do not leave fingerprints on the bulb,
since these may cause its overheating
and consequent breakage.
If you touch the bulb with bare hands,
remove any fingerprint with alcohol, in
order to avoid any damage.
DO NOT FORCE THE ELECTRIC CA-
BLES.
NOTE Before changing a bulb, check
the fuses, see p. 99 (CHANGING THE FU-
SES).
CHANGING THE DASHBOARD
BULBS
If you need assistance or technical advice,
consult your aprilia Official Dealer, who
can ensure you prompt and accurate servi-
cing.
PU
SH
To Next Page
Loading...
Need help?
General
