29
use and maintenance RSV mille ! - RSV mille R !
AUXILIARY EQUIPMENT
UNLOCKING/LOCKING THE
PASSENGER SEAT
◆ Position the vehicle on the stand, see p.
58 (POSITIONING THE VEHICLE ON
THE STAND).
◆ Introduce the key (1) in the seat lock.
◆ Rotate the key (1) anticlockwise, lift and
withdraw the seat (2) from behind.
NOTE Before lowering and locking the
seat (2), make sure that you have not left
the key in the glove/tool kit compartment.
To lock the seat (2), proceed as follows:
◆ Introduce its front part under the passen-
ger grab strap (3).
◆ Position the seat and press it, making
the lock snap.
Before leaving, make sure that the seat
(2) is properly locked.
NOTE For the 7 market, the # ver-
sion can be used only in single-seater con-
figuration. Therefore, vehicle outfit does
not include the passenger's seat.
NOTE Glove/tool kit compartment cover
(4) can be used as an alternative to the
passenger's seat (2).
To use the vehicle with the glove/tool kit
compartment cover it is necessary to re-
move the passenger's seat as previously
described.
See page 30 (UNLOCKING/LOCKING
THE GLOVE/TOOL KIT COMPARTMENT
COVER)for assembly instructions.
A useful compartment is available under
the glove/tool kit compartment cover; to
reach it, it is sufficient to release and re-
move the flap (5).
To Next Page
Loading...
Need help?
General
