26
use and maintenance RSV mille ! - RSV mille R !
MAIN INDEPENDENT CONTROLS
CONTROLS ON THE LEFT PART OF THE
HANDLEBAR
NOTE The electrical parts work only when the ignition switch
is in position “B”.
1) HORN PUSH BUTTON (H)
The horn is activated when the push button is pressed.
2) DIRECTION INDICATOR SWITCH (G)
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
3) DIMMER SWITCH (Y - Z)
When the light switch is in position "I": if the dimmer switch
is in position "Z", the high beam comes on; while if it is in
position "Y", the low beam comes on.
3) DIMMER SWITCH (Y - Z)
$
When it is in position “Y” the parking lights, the dashboard
light and the low beam are always on.
When it is in position “Z”, the high beam comes on.
4) LIGHT SWITCH (I - J -
•
) (not provided for
$
)
When the light switch is in position "
•", the lights are off; when
the switch is in position "J", the parking lights and the dash-
board light are on; when the switch is in position "I", the
parking lights, the dashboard light and the low beam are on.
The high beam can be operated by means of the dimmer
switch.
5) HIGH BEAM SIGNALLER PUSH BUTTON (F)/LAP PUSH
BUTTON (multifunction)
NOTE For the setting of the functions, see p. 20 (MULTI-
FUNCTION COMPUTER).
This push button makes it possible to use the high beam sig-
naller in case of danger or emergency, or displays the various
preset functions on the right multifunction display:
– hour and minutes;
– coolant temperature (°C or °F);
– chronometer.
To Next Page
Loading...
Need help?
General
