37
APPENDIX A: INSTALLATION SITE INSPECTION
General rules
Are the installation site, the electrical and hydraulic systems to which the appliance must be connected, fully in
compliance with the regulations in force?
□
Do the installation site have the proper hygienic conditions in relation to the lighting, aeration, solidity?
□
Are planned for the unit an holding area near the workplace and appropriate protective measures before the installation?
□
There is a dislocation of the material and equipment that makes it easy and safe to handle? Are avoided the piles that may
be subject to falls?
□
In case of lifting:
• Is expected the use of cranes or hoists that ensures stability in relationship with the weight of the load?
• Is planned a position where drive the lifting that will ensure the view of the area of the lifting path?
• Is planned a delimitation of the area, where the operation will take place, in order to avoid the presence of people
under the lifted load?
□
□
□
INTERNAL UNIT placing specification
The product is designed for indoor use;
• Does the place avoids the frost?
• Does the place avoids direct sunlight (even when windows are present)?
• Is the place free of acid vapours, dust or gases?
□
□
□
• Does the bearing wall supports the weight of an installed product full of water?
• Does the site allows the installation of the product with all the hydraulic, electric and gas connection and accessories?
□
□
Does the placement of the internal and external units guarantees the simplest connection (≤6m with ≤3m of fall)? The
Hydraulic and gas components are easy to reach in case of maintenance?
□
Does the placement of the units guarantees that the connection cables will be far from electrical boxes, data transmission
systems and wireless (wi-fi router)?
□
To Next Page
Loading...
Need help?
General
