Hybrid electric water heater (WiFi model) – OPERATING AND MAINTENANCE INSTRUCTIONS FOR THE USER
130
coming from
the product
No siphon or siphon is empty
Install a siphon.
Ensure it contains the necessary amount of water
Unusual or
excessive
consumption
compared to
expectations
Leaks or partial obstruction in the gas
refrigerant circuit
Switch the product ON in heat pump mode, use an
R134a leak detector to ensure there are no leaks
Unfavourable environmental or installation conditions
Evaporator is partially obstructed
Check the condition of the evaporator, grille and
conduits to ensure they are clean
Non-compliant installation
Other Contact technical assistance
8.4 Routine maintenance performed by users
It is advisable to rinse out the appliance after each routine or extraordinary maintenance intervention.
The pressure safety device must be operated regularly to verify that it is not clogged and to remove any
limescale deposits.
Verify that the condensate drain pipe is free from obstructions.
8.5 Water heater disposal
The appliance contains R134a-type refrigerant gas which must not be released into the atmosphere. In case of
permanent decommissioning of the water heater, ensure that disposal procedures are carried out by qualified personnel
only.
This product conforms to Directive WEEE 2012/19/EU.
The barred bin symbol on the appliance and its packaging indicates that the product must be scrapped separately from
other waste at the end of its service life. The user must therefore hand the equipment over to a sorted waste disposal facility
for electro-technical and electronic equipment at the end of its service life. Alternatively, the equipment may be returned to
the retailer at the time of purchase of a new equivalent type of appliance. Electronic equipment of size less than 25 cm can
be handed over to any electronics equipment retailer whose sales area is at least 400 m2 for disposal free of charge and without any
obligation to purchase new product.
Sorted waste collection for recycling, treatment and environmentally compatible scrapping contributes to the prevention of damage to
the environment and promotes reuse/recycling. For more detailed information on the collection systems available, contact the local waste
disposal service or the shop where the product was purchased.
To Next Page
Loading...
Need help?
General
